This post may contain affiliate links: read full affiliate disclosure.
Sunglasses have a habit of ending up everywhere – tossed on the dresser, buried inside a drawer, or hiding in a bag when you need them.
Once you own several pairs, keeping them visible without scratching the lenses or cluttering your space becomes even harder.
A DIY sunglasses holder gives every pair an easy-to-reach spot while making better use of walls, shelves, or small corners.
In this article, you’ll discover DIY sunglasses holder ideas for different spaces, collection sizes, budgets, and skill levels.
Leather Loops
Working with a small collection? Cut a firm leather panel and add short snap loops that cradle each frame securely.
Keep the loops slightly loose so thicker bridges slide in easily, while the flat backing keeps your sunglasses neatly separated.
Hang it beside your dresser or entryway mirror when you want everyday pairs visible without giving up valuable surface space.
Denim Pockets
Turn old denim pockets into surprisingly useful storage by framing them, giving loose sunglasses and small essentials their own landing spot.
Use deep jean pockets for bulkier frames, then add a second framed section if your collection needs more breathing room.
Placed beside a mirror, this upcycled setup makes choosing a pair quick while bringing a playful handmade detail to the wall.
Colorful Rails
Bring some color into plain wall storage by mounting several looped rails vertically, with enough separation for different frame shapes.
Assign each rail a few pairs instead of crowding every loop, which makes sunglasses easier to remove without knocking others down.
Mixing contrasting shades can turn the organizer into wall decor, especially in a bedroom, dressing corner, or colorful walk-in closet.
Dowel Rack
Got more sunglasses than a simple wall rail can handle? Build a freestanding wooden rack with dowels extending from both sides.
Drill evenly spaced holes through upright supports, then secure smooth dowels firmly so every pair gets an accessible resting point.
Leave generous gaps between levels for oversized frames, and use a wide wooden base to keep the loaded rack from tipping.
Cat Shelves
Give a small collection its own playful spot by mounting individual cat-shaped shelves where each everyday pair stays easy to reach.
Spacing the holders vertically keeps frames from bumping together, while the shallow ledges support them without creating bulky wall storage.
Try this near a dresser or entryway when you want organization to feel decorative rather than purely practical or overly structured.
Chain Frame
An unused picture frame can become useful again once you stretch two sturdy metal chains horizontally across the open center.
Secure each chain tightly at both ends, leaving enough clearance between rows so longer frames can hang without touching below.
Choose chain links wide enough for easy placement, and let the surrounding frame turn your sunglasses collection into simple wall art.
Macrame Display
If your room already leans boho, knot cotton cord around a wooden dowel and build open sections for holding several pairs.
Keep each knotted opening wide enough for the bridge to rest comfortably, especially when your collection mixes narrow and oversized frames.
Using different cord colors lets you match bedroom decor while turning practical sunglasses storage into a handmade feature worth displaying.
Hanging Pockets
For frames you want better protected, sew stacked fabric pockets onto a narrow backing instead of leaving every pair fully exposed.
Make each pocket deep enough to support the glasses without covering them completely, so choosing your next pair stays quick.
Add a sturdy hanging loop at the top, and you can use unused wall space without building shelves or drilling multiple holes.
Clear Cradles
Want every pair visible without adding visual weight? Mount clear acrylic cradles in neat rows across an unused section of wall.
Give wider frames their own larger spacing, and position each cradle level so sunglasses stay supported instead of leaning sideways.
This works especially well beside a vanity, where you can compare colors and frame shapes quickly while getting ready each morning.
Divided Case
When dust and accidental knocks are bigger concerns, build a shallow wooden case with individual compartments and a hinged transparent lid.
Line each section with soft fabric, then size the dividers around your collection so oversized frames never get squeezed into narrow spaces.
Keep the case on a dresser or shelf when you want organized storage that protects sunglasses without hiding your collection completely.
Catchall Tray
Not every DIY holder needs wall mounting, especially when you only rotate between one or two favorite pairs each week.
Create a shallow catchall tray with a raised center support, giving folded frames somewhere stable to rest without sliding around.
Place it near your keys or bedside essentials, and your most-used glasses gain a dependable landing spot between outings.
Cord Display
Turn your collection into part of the decor by cutting a sunglasses-shaped backing and adding sturdy cord underneath for hanging frames.
Let the cord dip slightly between attachment points, giving different bridge widths room to settle without stacking glasses tightly together.
This playful approach suits a bedroom or dressing corner where colorful lenses can stay organized while adding personality to the wall.
Stepped Stand
If you want countertop storage without spreading frames across the surface, build a narrow stepped stand with several staggered supports.
Use shallow grooves or ridged pieces at each level, helping the bridges stay centered while keeping lenses away from the base.
Its vertical shape fits neatly on a dresser or shelf, giving four favorite pairs separate spots without occupying much room.
Entryway Rail
Make sunglasses part of your leaving-the-house routine by fixing a slim wooden rail above the hooks you already use daily.
Stretch a sturdy cord through the board, then hang each pair by its bridge so different frame sizes remain easy to grab.
Positioning the holder near coats and bags keeps your everyday accessories together, which can save you from searching before heading outside.
Nose Stand
Sometimes one favorite pair deserves the simplest solution, especially when you reach for the same sunglasses almost every single day.
Carve or shape a small wooden upright with a raised nose support, making sure the bridge rests naturally without being forced.
A weighted base keeps the stand steady on a nightstand or dresser while giving your glasses a dedicated spot between uses.
Peg Tower
Try a compact peg tower when you need a few pairs within reach but do not want anything attached to your walls.
Space rounded pegs vertically along a sturdy upright, leaving enough clearance so lenses and temples never collide with the pair below.
Give the base enough width and weight to resist tipping, especially if heavier sunglasses will be stored on one side.
Elephant Stand
Bring some personality to a bedside table by shaping a small wooden elephant whose trunk naturally supports the bridge of one pair.
Round and sand every contact point carefully, especially around the trunk, so delicate frames rest securely without rubbing against rough edges.
Paint the base and details to match your room, turning everyday eyewear storage into a cheerful accent instead of ordinary clutter.
Branch Stand
For several everyday pairs, set smooth wooden uprights into a weighted base and add short side pegs at different heights.
Varying the peg positions gives wide and narrow frames enough breathing room, while the rounded wood keeps the display visually simple.
Set it on a dresser where you can rotate the stand easily and reach whichever pair matches what you are wearing.
Glass Rail
Put an unused decorative glass panel to work by using its open metal sections as individual hanging points for your eyewear.
Choose openings that support the bridges without pinching them, and keep enough distance between pairs to prevent lenses from knocking together.
Mounted near a mirror, the finished piece can organize sunglasses alongside lightweight accessories while adding a vintage handmade detail to your space.
Crochet Grid
If crochet is already your thing, turn leftover yarn into an open grid that can hold glasses through different stitched openings.
Work the panel around a wooden dowel for structure, keeping the stitches firm enough that heavier frames will not stretch them downward.
Hang different frame sizes across the wider gaps, letting the textured pattern double as soft wall decor when spaces remain empty.
Mustache Stand
Make one frequently worn pair easier to find by carving a playful wooden face with a raised nose that supports the bridge.
Keep the nose gently tapered and smoothly sanded, allowing different frame widths to sit naturally without putting pressure on delicate parts.
A round weighted base makes this quirky holder practical for a desk, bedside table, or dresser where small accessories often disappear.
Hanger Display
Repurpose a sturdy clothes hanger when your collection is growing and you need storage without building a full wooden organizer.
Hang each pair across the lower bar by its bridge, spacing wider frames apart so removing one does not disturb its neighbors.
Slip the hanger onto a closet rod or wall hook, making this especially handy when floor and dresser space are limited.
Floral Hanger
Give a plain wire hanger a softer finish by wrapping it with fabric, then adding faux flowers around the upper section.
Keep the lower rail uncovered so several sunglasses can hang freely, while the wrapped wire prevents the organizer from looking unfinished.
Use this in a colorful bedroom or dressing area when you want inexpensive storage that feels more decorative than purely functional.
FAQs
How Can I Keep a DIY Sunglasses Holder From Scratching the Lenses?
Sand wooden pieces smoothly and use soft cord, fabric, felt, or covered supports wherever the glasses make contact.
Leaving enough space between pairs also helps stop frames from knocking together whenever you grab one.
Can I Make a DIY Sunglasses Holder Without Drilling Into the Wall?
You can use a freestanding wooden stand, repurposed clothes hanger, countertop tray, or lightweight hanging organizer instead.
Just check the finished holder’s weight before hanging it, especially if you plan to store several pairs.
Hi, my name is Ali Mehmood! I’m a passionate writer and DIY enthusiast who loves turning creative ideas into practical, hands-on projects.
I created this website to share inspiring, budget-friendly ideas that you can do yourself – whether it’s organizing your home, crafting something unique, or creating fun projects for kids and pets.
I believe DIY isn’t just a hobby – it’s a smart way to save money, reduce waste, and enjoy the satisfaction of making things with your own hands.
I’m excited to have you as part of this growing community, and I’ll continue bringing you helpful, realistic, and fun DIY ideas you can actually use.
